itel vision 1 Display light jumper, itel display light repair by jumper, Itel display light not working light and Display Blank repair with Light ic and other components.
Display BackLight And blank display and led light way Repair
Display light problem is a common problem in smart-phone, mostly this problem comes when the handset drop-in water or any type of liquid damage.
When any smartphone has a display light problem you will check first off all display connectors or motherboard connectors for shorting or line brack in LCD lite or graphics way.
If All those Lines are ok you will check your mobile for water damage, Water damage to the mobile handset has many types of problems LCD back lite problem is a common problem in this condition.
LCD Problem commonly comes from light ic damage or display LED damage, first of all, check the voltage on the led diode in-display rapper then you will decide the next decision for tracing on the motherboard.
In This Post, We Will Guide Itel Vision 1 Display light and dead after Drop-in water damage, first of all, check the mobile battery connector for shorting by multimeter, and if it will short you check the mobile power supply for shorting like around the power ic.
Voltage check on led main positive or negative line on LCD connector if not come supply then chack main motherboard display connector for shorting or line brack.
All supply or light ways ok then chack the light ic or light component for shorting or damage, display backlight ic or components around light ic, voltage booster coil or capacitors and some of the resistance.
After you will check the light ic for shorting if it will short replace the ic or booster coil. Then check the mobile display light maybe comes and Smartphone is ok now.
